F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Voltage Regulator: Service and Repair
REMOVAL
NOTE: The generator brush and terminal holder and the voltage regulator are installed as an assembly only.
1. Remove the generator.
2. Remove the generator brush and terminal holder and the voltage regulator assembly.
1
Remove the screws.
2
Remove the generator brush and terminal holder and voltage regulator assembly.
INSTALLATION
1. Install the generator brush and terminal holder and the voltage regulator assembly.
1
Depress the brushes and insert a wire to hold brushes during installation.
2
Install the generator brush and terminal holder and the voltage regulator assembly.
3
Install the screws and remove the wire.
2. Install the generator.
