F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
6. Remove the bearing retainer.
7. Remove the bearing and gear.
-
Thoroughly clean all drill shavings from the steering column and inspect it for damage.
INSTALLATION
1. To install, reverse the removal procedure.
-
Install a new ignition switch lock cylinder.
-
Verify ignition switch lock cylinder operation.
2. WARNING: To avoid the risk of serious personal injury, read and follow all warnings, notes and instructions in the reactivation
procedure.
Reactivate the supplemental restraint system (SRS).