F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
4. To decrease caster and camber, use the following steps.
1
To decrease caster, move the from of the upper control arm inboard and move the rear of the upper control arm outboard.
2
To decrease camber. move the upper contrail arm inboard equally.
5. NOTE: Each increment of the notches on the frame pocket represents 0.4 degree.
Set the caster and camber to specifications.
^
If a caster increase of 1.2 degrees is required, move the front of the upper control arm outboard by 3 notches and move the rear of the upper
control arm inboard by 3 notches.
6. Tighten the nuts.
