F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Power Steering Pump: Description and Operation
Power Steering Pump
NOTE: On early build 4.6L and 5.4L engines there are four bolts mounting the power steering pump to the engine block. The fourth bolt on earlier
builds may be discarded upon the replacement of the power steering pump.
The CIII power steering pump has the following features:
^
It is a belt-driven, vane-type, power steering pump.
^
It is mounted directly to the engine block by three bolts.
^
The power steering pump is replaced as an assembly.
^
An identification tag attached to the power steering pump indicates the model number and bar code. Refer to the identification tag when the pump
replacement is required.
^
The power steering pump uses a quick connect fitting for the power steering pressure hose.
^
The power steering fluid reservoir is mounted on the LH side of the engine.
