F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
4. Install the snap ring.
5. NOTE: Place the steering gear sector shaft dust seal on the Sector Shaft Seal Replacer so the raised lip is toward the tool.
Use the Sector Shaft Seal Replacer to install the sector shaft dust seal.
^
Lubricate the steering gear sector shaft dust seal; use Multi-Purpose Grease DOAZ-19584-AA or equivalent meeting Ford specifications
ESB-M1C93-B and ESR-M1C159-A.
6. Remove the steering gear housing from the Bench Mounted Holding Fixture.
7. Position the input shaft bearing in the valve housing and use the Input Shaft Bearing/Seal Tool Set and a press to seat the bearing.
8. Use the Input Shaft Bearing/Seal Tool and a press to seat the power steering gear input shaft seal.
