F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Align the extension housing bushing in the extension housing so that the slots are in the 2 o'clock and 7 o'clock positions.
2. Using the special tool, install the extension housing bushing.
3. Align the extension housing seal in the extension housing, with the drain hole positioned downward.
4. Using the special tool, seat the extension housing seal.
5. Install the driveshaft.
6. Lower the vehicle.
7. Reconnect the battery ground cable.
8. Fill the transmission to the specified level with clean automatic transmission fluid.
Manual Control Lever Shaft and Seal
Manual Control Lever Shaft and Seal
