ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Transmission Mode Switch, A/T > < Auxiliary Transmission Fluid Cooler|Page 5300
Page 3
background image

3. Install the fluid cooler tubes in the front and rear cooler line case fittings.
4. Lower the vehicle.

5. CAUTION:  Do not use any fluid approved for MERCON V application. Using a fluid rated for MERCON V can cause internal damage in

MERCON V only applications.

Fill the transmission with the specified type and quantity of transmission fluid. 

6. Check for leaks
7. If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Transmission Mode Switch, A/T > < Auxiliary Transmission Fluid Cooler|Page 5300