F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
9. Using the special tool, measure differential ring gear backlash.
^
If the backlash is within specification, go to Backlash within specification in this procedure. The specification shown in the illustration is the
total allowable range. For the preferred range, refer to the Specifications.
^
If a zero backlash condition occurs, go to Zero backlash in this procedure.
^
If the backlash is not within specification, go to Backlash not within specification in this procedure.
Zero backlash
10. If a zero backlash condition occurs, add a 0.50-mm (0.020-inch) shim to the RH side and subtract 0.50 mm (0.020 inch) from the LH side to
allow backlash indication. Check backlash. Repeat Step 9.
