F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
^
If the original recorded preload is lower than specifications, tighten to the appropriate specification for used bearings. If the preluded is higher
than specifications, tighten the nut to the original reading as recorded.
21. Position the rear driveshaft and align the marks on the rear axle pinion flange.
22. CAUTION: If new bolts to retain the driveshaft to the axle are not available, coat the threads of the original bolts with threadlock.
CAUTION: The driveshaft centering socket yoke fits tightly on the rear axle pinion flange pilot. Make sure that the yoke seats squarely on the
flange, tighten the bolts evenly in a cross pattern as shown.
Install the bolts.
23. Install the differential case.
