F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
2. Install the driveshaft center yoke and new bearing cups.
1
Start a new hearing cup in the driveshaft center yoke.
^
Check the needle bearings for correct positioning.
2
Position the driveshaft center yoke on the spider.
3
Position the assembly in the special tool.
4
Press the bearing cup to just below the snap ring groove.
^
Repeat to install the new bearing cup on the opposite side of the driveshaft center yoke.
3. Install four new snap rings.
4
.Install a new centering cup spring.
5. Install a new spider and bearing cups.
1
Start a new bearing cup in the driveshaft centering socket yoke.
^
Check the needle bearings for correct positioning.