F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
16. Remove the speedometer drive gear.
1
Remove the speedometer gear retaining ring
2
Remove the speedometer drive gear.
Installation
1. Install the speedometer drive gear.
1
Install the speedometer drive gear.
2
Install the speedometer gear retaining ring.
2. NOTE: Extension housing must be installed within four minutes after applying silicone.
Apply a small bead of silicone rubber to the surface of the extension housing.
^
Use Silicone Rubber D6AZ-19562-AA or equivalent meeting Ford specification ESB-M4G92-A.
3. Install the extension housing.
1
Position the extension housing.
2
Install the bolts.
