F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Front Door Window Motor: Service and Repair
FRONT DOOR WINDOW REGULATOR MOTOR
REMOVAL
All vehicles
1. Raise the front door window glass to the full up position.
2. Remove the front door trim panel.
SuperCrew
3. Remove the screws and the trim panel brace.
All vehicles
4. Position the watershield aside.
5. CAUTION: Make sure the electrical connector is positioned aside before drilling.
To access the power window motor bolts, use a 19 mm (3/4-in) hole saw with a 8 mm (1/4-in) pilot to drill three holes at the existing drill dimples
on the door.
6. Disconnect the front door window regulator electrical connector.
