F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
7. CAUTION: Make sure the electrical connector is positioned aside before drilling.
To access the power window motor bolts, use a 19 mm (3/4 in) hole saw with a 8 mm (1/4 in) pilot to drill three holes at the existing drill dimples
on the door.
8. Remove the power window motor bolts and remove the motor.
INSTALLATION
1. To install, reverse the removal procedure.
-
Cycle the window glass to make sure the gears engage.
