F 150 Super Crew 2WD V8-5.4L Prop SOHC VIN Z (2003)
14. Remove the bolts.
15. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools
cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.
Remove the engine front cover from the front cover to cylinder block dowel.
-
Remove the engine front cover gasket.
-
Clean the mating surfaces with silicone gasket remover and metal surface prep. Follow the directions on the packaging.
-
Inspect the mating surfaces.
Installation
All vehicles
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools