F 150 Super Crew 2WD V8-5.4L Prop SOHC VIN Z (2003)
5. Disconnect and remove the power steering pressure hose.
Installation
All vehicles
1. Install a new seal on the power steering pressure hose at the power steering pump end.
^
Remove and discard the original seal.
^
Stretch the seal over the Seal Replacer until it is large enough to slip over the tube nut.
2. Route the power steering pressure hose in the vehicle. Connect the power steering pressure hose.
3. CAUTION: Replacement of the power steering pump pulley is necessary after being removed and installed two times.
Install the power steering pump pulley.
