F 150 Super Crew 2WD V8-5.4L Prop SOHC VIN Z (2003)
4. Install the manual control lever.
1
Position the manual control lever.
2
Install a new manual lever shaft outer nut.
5. With the manual lever in overdrive connect the shift lever control cable.
6. Install the digital TR sensor electrical connector.
7. Lower the vehicle.
8. NOTE: When the battery is disconnect and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 mm (10 miles) or more to relearn the strategy.
Connect the battery ground cable.