F 150 Super Crew 2WD V8-5.4L Prop SOHC VIN Z (2003)
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
1. Remove the driver seat safety belt buckle.
1
Disconnect the safety belt warning indicator switch electrical connector.
2
Use the special tool to remove the bolt.
3
Remove the driver seat safety belt buckle.
NOTE: To ease removal, position the 40 percent seat in its most rearward position and the 60 percent seat in its most forward position.
INSTALLATION
NOTE: Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing safety belt buckle or retractor assemblies.
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
Supercab