ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Safety Belt Retractor - SIR, Supercab|Page 7589 > < Front Safety Belt Retractor - SIR, Supercab|Page 7587
Page 8
background image

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES,
AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEACTIVATION/REACTIVATION
PROCEDURE.
  Refer to: Air Bag(s) Arming and Disarming.

3

Remove the seat on the side with the affected safety belt buckle and pretensioner.

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES,
AND INSTRUCTIONS IN THE SEAT REMOVAL AND INSTALLATION PROCEDURE.

60 percent seat

2. Remove the 60 percent seat cushion.

3. Remove the nut, the safety belt buckle and pretensioner and route the wire harness out from the seat.

NOTE:  Note the safety belt buckle pretensioner and usage detection switch wire harness routing for installation.

Captains and 40 percent seat

4. Remove the safety belt buckle pretensioner and usage detection switch electrical connectors from the seat cushion pan.

NOTE:  The driver side is shown, other seats are similar.

5. Remove the nut and the safety belt buckle and pretensioner.

NOTE:  Note the safety belt buckle pretensioner harness and usage detection switch wire harness routing for installation.

INSTALLATION

Front Safety Belt Retractor - SIR, Supercab|Page 7589 > < Front Safety Belt Retractor - SIR, Supercab|Page 7587