F 150 Super Crew 2WD V8-5.4L Prop SOHC VIN Z (2003)
Alignment: Service and Repair
Camber and Caster Adjustment
Camber and Caster Adjustment-4x2
1. Remove the alignment plate.
1
Remove the nuts.
2
Remove the alignment plate.
2. Install the washers and the nuts.
3. NOTE: A pry bar can be used between the upper control arm and the frame pocket to aid in moving the arm.
To increase the caster and camber, use the following steps.
1
To increase caster, move the front of the upper control arm outboard and move the rear of the upper control arm inboard.
2
To increase camber, move the upper control arm outboard equally.
