F 150 Super Crew 2WD V8-5.4L Prop SOHC VIN Z (2003)
Extension Housing: Service and Repair
Extension Housing Gasket - 4x2
Extension Housing Gasket-4x2
Special Tools
Special Tool(s)
Removal
NOTE: 4x2 shown, 4x4 similar.
All applications
1. NOTE: All gasoline vehicles will have new adaptive shift strategies. Whenever the vehicle's battery has been disconnected for any type of service
or repair the strategy parameters that are stored in the Keep Alive Memory (KAM) will be lost. The strategy will start to relearn once the battery is
reconnected and the vehicle is driven. This is a temporary condition and will return to normal operating condition once the Powertrain Control
Module (PCM) relearns all the parameters from the driving conditions. There is no set time frame for this process. If a concern is present during
downshifts or converter clutch apply, it is not the fault of the shift strategy and will require diagnosis.
The customer needs to be notified that they may experience slightly different upshifts either soft or firm and that this is a temporary condition and
will eventually return to normal operating condition.
Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.
4x4 applications
3. Remove the transfer case.
All applications
4. Remove the driveshaft.
5. Remove the transmission insulator to crossmember support nuts.