F 150 Super Crew 2WD V8-5.4L Prop SOHC VIN Z (2003)
9. With manual lever in overdrive, connect the shift control cable.
10. Install digital TR sensor electrical connector.
11. Install the filter and transmission fluid pan.
12. NOTE: To maintain initial driveshaft balance, align the index marks made during removal.
On 4x4 vehicles, install the front driveshaft.
1
Position the front driveshaft.
2
Install the eight front driveshaft bolts (four each end).
13. Lower the vehicle.
14. Connect the battery ground cable.
15. Fill the transmission with clean automatic transmission fluid and inspect for correct operation.
