F 150 Super Crew 2WD V8-5.4L Prop SOHC VIN Z (2003)
5. Disconnect the clutch hydraulic line from the slave cylinder.
6. Lower the vehicle.
7. Remove the clutch master cylinder reservoir and clutch master cylinder.
^
Rotate the clutch master cylinder 45 degrees clockwise.
8. CAUTION: Clean all rubber clutch master cylinder parts with Ford High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or
DOT 3 equivalent meeting Ford specification ESA-M6C25-A.
Clean all clutch master cylinder components.
9. Inspect the clutch master cylinder for:
^
weak spring.
^
damage to any reservoir components.
^
damaged cups.
^
scored piston.
Installation
1. Lightly clamp clutch master cylinder reservoir in a vise.
