ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Procedures|Page 8936 > < Procedures|Page 8934
Page 3
background image

4. Remove the rear door scuff plate.

5

Position the D-ring cover aside and remove the D-ring nut.

6. Position aside the rear door weatherstrip.

7. Remove the upper C-pillar trim panel.

8. Remove the lower C-pillar trim panel.

1

Remove the pin-type retainer.

2

Remove the C-pillar trim panel.
^

On the passenger side, disconnect the powerpoint electrical connector.

INSTALLATION

1. To install, reverse the removal procedure.

Upper Corner Trim Panel

Procedures|Page 8936 > < Procedures|Page 8934