ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Procedures|Page 8940 > < Procedures|Page 8938
Page 3
background image

4. Remove the rear door scuff plate.

5. Position the D-ring cover aside and remove the D-ring nut.
6. Position aside the rear door weatherstrip.

7. Remove the upper C-pillar trim panel.

8. Remove the lower C-pillar trim panel.

1

Remove the pin-type retainer.

2

Remove the C-pillar trim panel.
-

On the passenger side, disconnect the power point electrical connector.

9. To install, reverse the removal procedure.

Trim Panel - Corner, Upper

TRIM PANEL - CORNER, UPPER

Procedures|Page 8940 > < Procedures|Page 8938