ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cable and Conduit - Front|Page 6263 > < Parking Brake Cable|Specifications
Page 1
background image

Parking Brake Cable: Service and Repair
Cable and Conduit - Front

Cable and Conduit-Front 

Removal and Installation 

1. NOTE:  Make sure the parking brake control is fully released.

Relieve the tension on the parking brake system.

1

Pull the front parking brake cable down.

2

Insert a suitable retainer.

2. Disconnect the front parking brake cable and conduit from the RH parking brake rear cable and conduit.

^

Pull the front parking brake cable and conduit rearward to unclip it from the RH parking brake rear cable and conduit.

Cable and Conduit - Front|Page 6263 > < Parking Brake Cable|Specifications