ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Radiator Cooling Fan > < Cooling System|Capacity Specifications|Page 2967
Page 1
background image

Coolant Reservoir: Service and Repair

Removal and Installation

1. Partially drain the cooling system. 

2. Remove the degas bottle hose from the radiator.

1. Release the hose clamp and slide it away from the hose end.
2. Slide the overflow hose off the radiator fitting.

3. Disconnect the lower radiator hose from the degas bottle.

4. Remove the degas bottle.
5. To install, reverse the removal procedure.

Radiator Cooling Fan > < Cooling System|Capacity Specifications|Page 2967