ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Blend Door Motor|Page 7232 > < Blend Door Motor|Page 7230
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Air Door Actuator / Motor, HVAC

Air Inlet Duct Door Vacuum Control Motor

REMOVAL

1. Remove the plenum chamber.

2. Remove the air inlet door vacuum control motor.

1

Disconnect the vacuum line.

2

Remove the screws.

3

Remove the air inlet door vacuum control motor.
^

Rotate the vacuum control motor to disconnect the vacuum control motor rod from air inlet door lever.

INSTALLATION

1. To install, reverse the removal procedure.

Panel/Defrost Door Vacuum Control Motor

REMOVAL

1. Remove the panel/defrost door vacuum control motor.

1

Disconnect the vacuum line.

2

Remove the push nut.

3

Remove the screws.

4

Remove the panel/defrost door vacuum control motor.

INSTALLATION

1. To install, reverse the removal procedure.

Panel/Floor Door Vacuum Control Motor

REMOVAL

Blend Door Motor|Page 7232 > < Blend Door Motor|Page 7230