F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
Leak Detection Valve: Service and Repair
REMOVAL
1. Remove the Evaporative Emission (EVAP) canister.
2. Remove the canister vent solenoid.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out the Leak Test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Evaporative Emission Repair Verification Drive Cycle
NOTE: Lubricate the O-ring seals with MERPOL(R) O-ring Seal Lubricant or equivalent meeting Ford specification ESE-M99B144B.