F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
16. Disconnect the Vapor Management Valve (VMV) hose.
17. Remove the bolts and lift the fuel injection supply manifold and injectors upward, out of the intake manifold.
18. Remove the fuel injectors from the fuel injection supply manifold.
19. Inspect the two O-ring seals from each fuel injector. Install new O-ring seals as needed.
INSTALLATION
1. Install two O-ring seals to each fuel injector.
NOTE: Lubricate the new O-ring seals with clean engine oil to aid installation.
2. Install the fuel injectors into the fuel injection supply manifold.
