F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
^
Driver's side engine mount bolt
^
Exhaust pipe to exhaust manifold
^
Exhaust hanger at transmission mount
2.
Apply parking brake, apply service brake and start engine.
a.
Shift transmission in Drive and raise engine RPM to 1600-2000 RPM, return engine to idle.
b.
Shift transmission to Reverse and raise engine RPM to 1600-2000 RPM, return to idle, repeat Drive and Reverse procedure.
c.
Shift transmission to Neutral and raise engine RPM one time to 3000 RPM, turn off engine and shift transmission into Park.
3.
Torque all related fasteners:
^
Torque driver's side engine mount bolt to 80 N.m (58 Lb-ft)
^
Torque passenger side engine mount to frame nuts to 90 N.m (66 Lb-ft)
^
Torque transmission mount nuts to 103 N.m (76 Lb-ft)
^
Tighten the driver's side exhaust pipe to exhaust manifold nuts evenly and torque to 40 N.m (30 Lb-ft)
^
Tighten the passenger's side exhaust pipe to exhaust manifold nuts evenly and torque to 40 N.m (30 Lb-ft)
^
Torque exhaust pipe hanger nut and bolt to 40 N~m (30 Lb-ft)
Obtain an Authorized Modifications Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized
Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
012408A
Replace Engine Mounts,
2.8 Hrs.
Perform Powertrain
Neutralize Procedure, And
