ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Impact Sensor > < Technician Safety Information|Page 7824
Page 10
background image

21. Connect and position the driver air bag module to the steering wheel.

1

Connect the horn switch electrical connector.

2

Connect the driver air bag module electrical connector.

3

Position the driver air bag module to the steering wheel.

22. Install the two driver air bag module bolts.
23. Install the two steering wheel back cover plugs.
24. Restore the vehicle to operating condition.

1

Reactivate the supplemental restraint system (SRS).

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS,
CAUTIONS, NOTES, AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
DEACTIVATION/REACTIVATION PROCEDURE.

2

With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE
FROM THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE
VIOLATION OF VEHICLE SAFETY STANDARDS.

Impact Sensor > < Technician Safety Information|Page 7824