F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
12. On 4x4 vehicles, install the front driveshaft.
1. Position the front driveshaft.
2. Install the eight front driveshaft bolts (four each end).
13. Lower the vehicle.
14. Connect the battery ground cable.
15. Fill the transmission with clean automatic transmission fluid and inspect for correct operation.
4R100
Manual Control Lever Shaft and Seal
Special Tools
Special Tool(s)
Removal
1. Remove the fluid pan gasket and filter.
2. Disconnect the shift cable.
1. Disconnect the shift cable from the manual lever.
2. Disconnect the cable housing from the bracket; position aside.