F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
Shift Cable: Adjustments
Cable and Bracket Adjt - With 4R70W Trans.
Cable and Bracket Adjustment-4.2L, 4.6L with 41370W Transmission
1. Place the gearshift lever in the (D) position. Place a three pound weight on the gearshift lever.
2. Raise and support the vehicle.
3. Disconnect the transmission shift cable from the manual control lever.
4. Unlock the lock tab on the transmission shift cable.
5. Place the manual control lever in the (D) position.
1. Place the manual control lever in the first gear position.
2. Move the manual control lever two detents to the (D) position.
6. Connect the transmission shift cable to the manual control lever.
7. Lock the transmission shift cable lock tab.
8. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Lower the vehicle.
9. Remove the three pound weight.
10. Carefully move the gearshift lever from detent to detent and compare with transmission settings. Verify that the vehicle will start in PARK or
NEUTRAL and backup lamps illuminate in REVERSE. If not, Steps 1-5 must be repeated and include digital TR sensor adjustment in
NEUTRAL. Read just if necessary.
