ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Auxiliary|Page 5290 > < Auxiliary|Page 5288
Page 3
background image

CAUTION: Verify that the flow arrow on the filter points toward the transmission. 

Install a new inline transmission fluid filter (XC3Z-7B155-BA). If the vehicle was not equipped with an inline fluid filter install a new inline
transmission fluid filter kit (XC3Z-7B155-AA) according to the instructions supplied with the kit. Carry out the transmission fluid cooler flow test
procedure to verify that there is correct fluid flow through the new inline fluid filter. 

All vehicles

3. Position the air deflector and install the fasteners. 

4x4 vehicles

4. Position the skid plate and install the bolts. 

All vehicles

5. Lower the vehicle. 

Vehicles with 4R100 transmission

6. CAUTION: Do not use any fluid approved for MERCON V application. Using a fluid rated for MERCON V may cause internal damage in

MERCON only applications. 

Fill the transmission with the specified type and quantity of transmission fluid.  
-

Use Motorcraft MERCON V Multi-Purpose (ATF) Transmission Fluid XT-5-QM or equivalent meeting MERCON specifications. 

MERCON ATF is being replaced by MERCON V ATF as a service fluid, per TSB 06-14-4.

Vehicles with 4R70W transmission

7. Fill the transmission with the specified type and quantity of transmission fluid.  

-

Use MERCON V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON V specification. 

Auxiliary|Page 5290 > < Auxiliary|Page 5288