F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
8. Remove the solenoid body assembly.
1. Remove the bolts.
2. Remove the nut.
3. Remove the solenoid body assembly.
9. Remove the solenoid screen assembly by rotating and pulling.
10. CAUTION: The steel electronic pressure control (EPC) check ball is spring-loaded under the valve body separator plate.
NOTE: If the valve body separator plates are not to be serviced, proceed to installation procedure.
Remove the valve body separator plate reinforcement.
1. Remove the bolts.
2. Remove the separator plate reinforcement.
11. Lower and remove the valve body separator plate and gaskets.
