F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
-
The rubber check balls and the steel EPC check ball and spring assembly will fall out and may become lost or stick to the worm trail of the
case.
-
Remove and discard separator plate gaskets.
Installation
CAUTION: Using the incorrect gaskets can cause damage to the transmission.
1. NOTE: Refer to correct gasket usage.
NOTE: If the valve body separator plate was not removed, proceed to Step 6.
NOTE: Apply a light film of petroleum jelly to the valve body separator plate prior to assembling the new gaskets.
Assemble the new gaskets to the valve body separator plate.
1. Main control to case gasket
2. Valve body separator plate
3. Main control to separator plate gasket
2. NOTE: Apply a small amount of petroleum jelly to each check ball prior to positioning them on the valve body separator plate.