F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
5. NOTE: The word UP stamped on the separator plate reinforcement, must be visible when installed.
Install the separator plate reinforcement plate.
1. Position the separator plate reinforcement plate.
2. Install the bolts.
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
7. NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with silicone grease.
Install the solenoid body assembly.
1. Install the solenoid body assembly.
2. Install the nut.
3. Install the bolts and nut finger-tight.
