ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Clutch Slave Cylinder > < Two Way Radio - Signal Loss/Static|Page 5399
Page 4
background image

8. Connect the clutch pedal position switch. 

9. Connect the clutch master cylinder push rod and retainer bushing. 

10. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking, or towing an air suspension vehicle.

This can be accomplished by turning off the air kick panel area. failure to inflation of deflation of the air springs which may result in shifting of the
vehicle during these operations. 

Raise and support the vehicle.

11. Connect the clutch hydraulic line to the transmission. 
12. Lower the vehicle. 
13. Turn on the air suspension switch, if equipped. 
14. Bleed the clutch hydraulic system. 

Clutch Slave Cylinder > < Two Way Radio - Signal Loss/Static|Page 5399