F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
10. Remove the lower shock absorber nuts and bolts (one on each side).
11. Remove the rear axle U-bolt assembly.
^
Remove the rear spring plate nuts.
^
Remove the two rear spring plate U-bolts.
^
Remove the rear spring plate.
^
Repeat the procedure for the other side.
13. CAUTION: The driveshaft centering socket yoke fits tightly on the rear axle pinion flange pilot. Make sure that the yoke seats squarely on the
flange, tighten the bolts evenly in a cross pattern as shown.
To install, reverse the removal procedure.
