F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
6. Rotate the differential pinion gears to align the differential pinion shaft bore.
7. Insert the differential pinion shaft, and install a new differential pinion shaft lock bolt finger-tight.
8. CAUTION: If equipped, make sure that the notches on the case flange and the anti-lock speed sensor ring are aligned.
Press the new anti-lock speed sensor ring and the differential ring gear on the differential case.
9. Install the differential ring gear bolts and tighten.
^
Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-Al to the differential ring gear
bolts.
10. Install new differential bearings, if removed.
11. Install the differential case.
Differential Case and Ring Gear -Traction-LOK
Differential Case and Ring Gear Traction-Lok
