F 150 Super Crew 2WD V8-5.4L SOHC VIN L (2001)
Installation
1. Lubricate the lip of the wheel bearing oil seal with grease.
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the two axle shafts.
3. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Install the U-washers.
1. Position the two U-washers on the button ends of the axle shafts.
2. Pull-the axle shafts outward.
4. NOTE: If a new pinion shaft lock bolt is unavailable, coat the threads with thread lock.
