F 150 Super Crew 4WD V8-4.6L SOHC VIN 6 (2003)
Part 4 Of 4
4. Tighten the engine front cover fasteners in sequence in three stages.
-
Stage 1: Tighten fasteners 1 through 5 to 25 Nm (18 ft. lbs.).
-
Stage 2: Tighten fasteners 6 and 7 to 48 Nm (35 ft. lbs.).
-
Stage 3: Tighten fasteners 8 through 15 to 48 Nm (35 ft. lbs.).
All vehicles
5. Position the belt idler pulley and install the bolt.
Supercharged engines
6. Install the idler support bracket.
All vehicles
7. Raise and support the vehicle.
