F 150 Super Crew 4WD V8-4.6L SOHC VIN 6 (2003)
5. Remove the restraint system diagnostic tool from the vehicle harness side of the clockspring electrical connector at the base of the steering column.
6. Connect the clockspring electrical connector at the base of the steering column.
7. Attach the restraint system diagnostic tool to the clockspring electrical connectors at the top of the steering column.
NOTE: F150 is shown, Lightning is similar.
8. Connect the battery ground cable.
9. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS). See: Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure
10. Disconnect the battery ground cable and wait at least one minute.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW WARNINGS, CAUTIONS, AND NOTES
AT THE BEGINNING OF THE REMOVAL PROCEDURE.
