F 150 Super Crew 4WD V8-4.6L SOHC VIN 6 (2003)
NOTE: Use care when separating the seat backrest covering from the hook and loop fasteners to avoid tearing the fastener from the seat foam.
13. Remove the hog rings from the center of the seat trim cover. Remove the seat trim cover from the foam pad.
14. Remove the seat backrest foam pad.
15. Remove the safety belt retractor.
1
Remove the anchor bolt.
2
Remove the safety belt retractor locating tab.
NOTE:
^
Do not allow the safety belt to recoil back into the retractor.
^
Safety belt retractors are specific to LH or RH seats and are not interchangeable.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
1. Install the safety belt retractor and safety belt retractor bolt.
1
Align the safety belt retractor locating tab.
2
Install the anchor bolt.
NOTE:
^
Do not allow the safety belt to recoil back into the retractor.
^
Safety belt retractors are specific to LH or RH seats and are not interchangeable.
2. Install the seat backrest foam pad.
