F 150 Super Crew 4WD V8-4.6L SOHC VIN 6 (2003)
3. Remove the upper corner trim panel.
1
Separate the door jamb weather stripping.
2
Pull out to release the retaining clips and remove the upper corner trim panel.
4. Pull out and remove the shoulder safety belt height adjuster cover.
5. Remove the shoulder safety belt height adjuster.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the shoulder safety belt height adjuster.
INSTALLATION
1. To install, reverse the removal procedure.
^
See the removal procedure or Specifications for torque specifications.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
2. Check the restraints system for correct operation.
Regular Cab