F 150 Super Crew 4WD V8-4.6L SOHC VIN 6 (2003)
3. With pinion depth set and the drive pinion installed, place the differential case in the rear axle housing.
4. Install a shim on the left side.
5. CAUTION: Mark the position of the bearing caps as arrows may not be visible. The bearing caps must be installed in their identical locations and
positions.
NOTE: Apply pressure toward the left side to make sure the left bearing cap its seated.
Install the left bearing cap and loosely install the bearing cap bolts.
6. Install progressively larger shims on the right side until the largest shim selected can be assembled by hand.