F 150 Super Crew 4WD V8-4.6L SOHC VIN 6 (2003)
11. NOTE: RH side shown, LH side similar.
Remove the LH and RH rear power sliding window cable screws.
12. Disconnect the LH and RH rear power sliding window cable.
All vehicles
13. If equipped, disconnect the rear window defrost connectors.
14. Cut the foam butyl from around the back window glass.
15. Remove the back window glass.
1
Remove the 12 nuts.
2
Remove the back window glass.
16. Remove any remaining foam butyl from the window glass frame.
INSTALLATION
All vehicles
1. Clean the back window glass with an alcohol-free cleaner.
2. Apply 8 mm foam butyl, or equivalent meeting Ford specification WSB-M3G143-B to the back window glass.
-
Start at the bottom middle and work around.
