F 150 Super Crew 4WD V8-5.4L Prop SOHC VIN Z (2003)
3. Use the special tools to remove the crankshaft rear oil seal.
Installation
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools
cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.
NOTE: Lubricate the inner lip of the crankshaft rear oil seal with clean engine oil.
Use the special tools to install the rear oil seal.
2. Using the special tools, install the crankshaft rear oil slinger.
3. Install the flexplate or the flywheel.