F 150 Super Crew 4WD V8-5.4L Prop SOHC VIN Z (2003)
1. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
NOTE: F150 is shown, Lightning is similar.
2. Connect and position the driver air bag module to the steering wheel.
1
Connect the horn switch electrical connector.
2
Connect the driver air bag module electrical connector.
3
Position the driver air bag module to the steering wheel.
3. Install the two driver air bag module bolts.
4. Install the two steering wheel back cover plugs.
5. Connect the battery ground cable.
6. With the restraint system diagnostic tools still installed at the remaining deployable devices, prove out the supplemental restraint system (SRS).
See: Air Bag(s) Arming and Disarming/Service and Repair/Prove Out Procedure
