F 150 Super Crew 4WD V8-5.4L Prop SOHC VIN Z (2003)
Installation
1. Position the torsion bar to the vehicle and install the bar to the lower control arm.
2. Reposition the torsion bar crossmember support. Install the torsion bar adjusting brackets to the torsion bars.
3. Install the crossmember support retaining bolts.
4. Load the torsion bar.
1
Install special tools T95T-5310-A and T96T-5310-A on the crossmember support and to the torsion bar adjuster.
2
Tighten the special tool to load the torsion bar.
3
Install the torsion bar adjuster nuts.
4
Loosely install the torsion bar adjuster bolt.
5
Remove the special tools.
-
Repeat on the opposite side.
